30 mm PV Module Aluminium Frame (6005A-T5)
Products are supplied through qualified partner manufacturers in China. Applicable manufacturer certificates and scope are confirmed for each model and order. Delivery destinations and terms are confirmed against documented order requirements. Project-specific manufacturer authorization and applicable quality and compliance documents are provided with shipment where applicable.
Product Overview & Technical Data
Product Overview
pv module aluminium frame 30 mm standards require 30 mm anodised aluminium construction for crystalline photovoltaic modules, extruded in 6005A-T5 with corner-key ends, drainage, and earthing provisions.
A 30 mm frame is the low-profile option and it is chosen for weight and cost on modules where the mechanical load case allows it. The frame does three jobs that are easy to overlook: it carries the module’s mechanical load test – snow on the front, uplift on the back – through the laminate to four clamping points; it drains water off the glass so the lower rail does not hold a standing pool that freezes; and it provides the earthing path that the module’s safety certification depends on. Get the drainage slot geometry wrong and the module falls in the field for reasons that have nothing to do with the cells.
The alloy is 6005A-T5 rather than 6063-T5, and that is a deliberate choice. A 30 mm frame has little section depth to work with, so the stiffness has to come from the metal rather than from the geometry – 6005-T5 carries a higher mechanical rating than 6063-T5 in the same envelope. Where a design calls for the general architectural grade, 6063-T5 is available, and 6061-T6 for the highest-duty components.
Product Specifications & Applications:
* Product Name: 30 mm PV Module Aluminium Frame (6005A-T5)
* Material Grade: Extruded Aluminium Alloy 6005A-T5
* Profile Height: 30 mm Low-Profile Design
* Key Features: Corner-key ends, integrated drainage slots, earthing provisions
* Applications: Crystalline photovoltaic solar modules and panel framing
Tell Us the Duty
The useful starting point is what the profile has to do: span, wind load, U-value target, opening type. From that we identify the series and say plainly where a cheaper option would be a false economy.
Tooling Where Needed
Bespoke sections are normal here rather than exceptional. Die design, simulation, machining and vacuum nitriding are all in-house, and you approve a sample extrusion before production is booked.
Send the drawings, the opening schedule or the performance target. Our engineers will confirm the series, the alloy, the finish and the delivered price — and tell you plainly if another series in the range fits your project better.
Supply & Delivery Notes
Contract & Export Entity
Luyu International coordinates the contract, payment, export documents and project delivery.
Manufacturing Arrangement
Approved manufacturers organize production against confirmed drawings, specifications and orders.
Quality & Documents
Manufacturer certificates, test reports, batch inspection and third-party inspection can be arranged.
International Delivery
FOB, CIF and DDP support covers packing, loading, customs declaration and international logistics.
Certificates, test reports and delivery documents are subject to the current project, product model and documents available from the manufacturer.
Technical Data & Specification Review
Published parameters are reference configurations for this series. Final values are subject to approved drawings, manufacturer technical documents, samples and project inspection records.
| Temper and grade | 6063-T5 for standard sections · 6005-T5 where load rating governs · 6061-T6 for the heaviest duty |
| Finish routes | Anodised · powder-coated · PVDF fluorocarbon · electrophoretic · wood-grain transfer, all produced on site |
| Bespoke sections | Die cut to your drawing or sample; existing dies modified where the geometry is close |
| Order-specific dimensions | Cut length, wall thickness inside the design envelope, colour to approved sample, bundle quantity |
| Manufacturing and shipping | 50,000 t/year partner manufacturing base, 100,000 t+ group-wide; direct export licence; supervised container loading |
Dimensional and performance figures are taken from the manufacturing partner’s own product catalogue. Mill certificates, spectrometer analysis reports and coating thickness records are issued with each shipment.
What we can change for your project – and what we cannot
Material and Grade
The alloys used are 6063-T5, 6005-T5 and 6061-T6. 6063-T5 covers the general architectural sections where surface quality matters most; 6005-T5 is specified when a section has to carry more load without growing in depth; 6061-T6 is reserved for the highest-stress parts. Ageing runs in nine-frame gas-fired double-door ovens with the temper confirmed by hardness check, and billet chemistry is verified by spectrometer on every heat.
Surface Finish
Finishing is not subcontracted. Anodising, powder coating, fluorocarbon (PVDF) coating, electrophoretic lacquer and wood-grain heat transfer are all in-house processes on the same site as the presses, using chromium-free pre-treatment and first-tier electrostatic powder. Keeping extrusion and coating under one roof is what keeps colour consistent across a batch that ships over several months.
Custom Tooling
A section that does not exist yet is a normal request here. Die design, simulation analysis, die cutting and vacuum nitriding are all done on site, so a drawing or a physical sample can be turned into a production die without going outside the factory. Where the requirement is a variant of something already in the 5,000-item range, modifying the existing die is faster and costs less than cutting new steel – and we will say which route applies before you commit.
Made-to-Order Sizing
Nothing here is sold from a fixed stock list. Cut length follows the schedule you issue, wall thickness is set anywhere within the envelope the section was designed for, finish colour is matched to an approved sample, and the bundle is made up to whatever suits handling at the far end. Cutting to schedule rather than to a stock bar is what removes offcut waste from the fabrication floor.
Factory and Export Capability
Shipment is arranged from the selected partner manufacturer; the manufacturing entity and export eligibility are confirmed for each order. Factory capability and production capacity are verified against the selected manufacturer’s current documents before order confirmation. Profiles are filmed, moisture-wrapped, foam-interleaved and timber-crated, and containers are loaded under our own supervision on FOB, CIF or DDP terms.
Alloy, Temper, Finish
Billet chemistry is checked by spectrometer on every heat, the temper is confirmed to the drawing, and the finish is applied in-house over approved partner manufacturer chromium-free pre-treatment.
Applications
Module repair and re-framing
Matching an existing frame section from a sample where original tooling is unavailable.
Where this profile is specified
The configuration of Where this profile is specified is selected against the operating conditions, installation interfaces and destination-market requirements. Include the intended use and site constraints in the RFQ.
Crystalline module framing
Standard four-side frame for mono and poly PERC modules where the mechanical load case permits 30 mm.
Rooftop residential modules
Lower frame height saves weight per module on light roof structures.
Cost-sensitive module lines
The lowest metal weight per module in the frame range.
OEM module manufacture
Frames extruded to the module maker’s own drawing on a dedicated die.
Anodised marine and coastal duty
Anodising gives the oxide layer thickness these environments need.
Quality Control & Inspection
Inspection for 30 mm PV Module Aluminium Frame (6005A-T5) can cover the approved specification, appearance, dimensions and agreed performance checks. Factory or third-party inspection criteria must be confirmed before the order.
Packing & Delivery
Shipping and Terms
Container loading is supervised by our own staff, packing is film, moisture barrier, foam interleaving and timber crating, and terms are FOB, CIF or DDP as you prefer.
Other products in this range, and where they have been used
Ground-Mount PV Aluminium Purlin (6005A-T5)
Ground mount PV purlin in 6005A-T5 aluminium for utility-scale solar racking.
Single-Axis Tracker Aluminium Torque Arm (6082-T6)
Solar tracker aluminium torque arm in 6082-T6 for high-load single-axis tracking.
35 mm Bifacial-Module Aluminium Frame (6005A-T5)
Bifacial PV module frame 35 mm in 6005A-T5 aluminium, anodised for 25-year service.
The full range sits under Solar PV Aluminium, and the buildings and sites these products have gone into are listed under Overseas Projects. If none of them is quite your specification, say what is different in the enquiry – most of what we ship is made to a drawing rather than picked off a shelf.
Related Products
Project Sourcing & Export Delivery
Requirement Review
Confirm application, drawings, specifications, quantity, destination and delivery target.
Technical Alignment
Check materials, dimensions, performance, finish and destination-market standards.
Quality Inspection
Arrange samples, production checkpoints, factory or third-party inspection as agreed.
Export Delivery
Align packing, labels, documents, container loading and international logistics.
Request a Quote
Specification review, supplier verification, quality control, export packing and delivery coordination for international projects and professional buyers.
