C.MQ Series Exposed-Frame Curtain Wall
Products are supplied through qualified partner manufacturers in China. Production capacity is confirmed with the selected manufacturer for each order. Indicative MOQ 1 ton, subject to specification and manufacturer confirmation. Delivery destinations and terms are confirmed against documented order requirements. Project-specific manufacturer authorization and applicable quality and compliance documents are provided with shipment where applicable. Get quote.
Product Overview & Technical Data
Product Overview
Luyu International provides comprehensive aluminum curtain wall system solutions for commercial buildings, high-rise structures, and architectural facades. Our curtain wall systems combine structural performance, aesthetic flexibility, and energy efficiency for projects of any scale.
Qualified partner manufacturers produce unitized and stick-built aluminum curtain wall systems including exposed-frame, semi-hidden, and fully hidden designs. All systems are engineered for wind load, seismic performance, and thermal efficiency, with full technical support from design to installation.
c.mq110-160 exposed-frame curtain wall system built from plain non-thermal-break aluminium profile, with a 60 mm visible face and mullion depths of 110, 120, 140, 150 and 160 mm.
The C.MQ series is the commercially honest option in the curtain-wall range: it achieves the exposed-frame curtain-wall appearance using plain aluminium profile rather than thermal-break sections, at a materially lower cost per square metre. That trade is the right one on a great many buildings – unconditioned circulation spaces, car park screens, podium infill, warehouse and industrial elevations, and projects in mild climates where the facade is not carrying a thermal-transmittance requirement. Where the elevation does have a U-value target, the thermal-broken 65MQ or 65GRMQ series is the correct specification and this one is not.
Geometrically the series is a full curtain wall, not a simplification. The visible face is 60 mm on both mullion and transom, so the grid is square, and five mullion depths from 110 to 160 mm are selected by structural calculation exactly as they would be in a thermal-broken system. Wind load does not care whether the section has a polyamide strip in it.
Two practical features: a raised support feature in the section gives the glass a positive bearing during installation, which speeds up glazing and reduces the risk of a unit being set out of position, and shaped cover caps articulate the facade style so the elevation still has visual character despite the simpler section. Additional custom c.mq110-160 exposed-frame curtain wall system specifications are available for specialized industrial or commercial project requirements.
Product Specifications & Applications:
* Product Name: C.MQ110-160 Exposed-Frame Curtain Wall System
* Visible Face: 60 mm on both mullion and transom for a uniform square grid
* Mullion Depths: 110 mm, 120 mm, 140 mm, 150 mm, and 160 mm options selected via structural calculation
* Key Features: Cost-effective plain non-thermal-break design, positive glass-bearing support feature
* Applications: Unconditioned circulation spaces, car park screens, podium infill, warehouse elevations, c.mq110-160 exposed-frame curtain wall system installations
Supply & Delivery Notes
Contract & Export Entity
Luyu International coordinates the contract, payment, export documents and project delivery.
Manufacturing Arrangement
Approved manufacturers organize production against confirmed drawings, specifications and orders.
Quality & Documents
Manufacturer certificates, test reports, batch inspection and third-party inspection can be arranged.
International Delivery
FOB, CIF and DDP support covers packing, loading, customs declaration and international logistics.
Certificates, test reports and delivery documents are subject to the current project, product model and documents available from the manufacturer.
Technical Data & Specification Review
Published parameters are reference configurations for this series. Final values are subject to approved drawings, manufacturer technical documents, samples and project inspection records.
| Series | C.MQ110-160 exposed-frame curtain wall |
| Concept | achieves the exposed-frame curtain-wall appearance using plain (non-thermal-break) aluminium profile, for a lower-cost elevation |
| Visible face width | 60 mm on mullion and transom |
| Mullion depth options | 110 / 120 / 140 / 150 / 160 mm by structural calculation |
| Glass support | a raised support feature in the section gives the glass a positive bearing during installation |
| Cover caps | shaped cover caps that articulate the facade style |
| Alloy selection | 6063-T5, 6005-T5 and 6061-T6, chosen against the duty of the individual section |
| Surface treatment | Anodising, powder coating, PVDF, electrophoresis and wood-grain transfer; industrial-grade powder, chromium-free pre-treatment |
| Tooling | In-house die design, simulation analysis, machining and vacuum nitriding; sample length before the production run |
| Sizing to order | Length schedule, wall thickness within envelope, signed-off colour, packing unit |
| Factory capability | 100-mu site, 40,000 m² of building, 375 staff, three laboratories; direct export on FOB / CIF / DDP |
Dimensional and performance figures are taken from the manufacturing partner’s own product catalogue. Mill certificates, spectrometer analysis reports and coating thickness records are issued with each shipment.
What we can change for your project – and what we cannot
Material and Grade
Sections are extruded in 6063-T5, 6005-T5 or 6061-T6 depending on the load path – the lighter architectural members in 6063-T5, load-carrying members in 6005-T5, and the highest-stress components in 6061-T6. Billet is sourced from major domestic smelters with per-heat spectrometer verification, and ageing is controlled in gas-fired double-door ovens.
Surface Finish
Anodising, powder coating, fluorocarbon (PVDF) coating, electrophoretic lacquer and wood-grain heat transfer are all available, all in-house, all ahead of a chromium-free pre-treatment stage. Because extrusion, crimping and coating happen on one site, a mixed-finish order for a single project stays on one production schedule instead of being split across subcontractors.
Custom Tooling
Die opening is supported end to end: profile drawing review, simulation analysis, die manufacture and vacuum nitriding are all in-house capabilities. Send a section drawing or a sample and a die can be cut for it; where the requirement is close to an existing section, modifying the existing die is normally quicker and lowers the tooling charge.
Made-to-Order Sizing
Everything that can reasonably be varied is varied to order – cut length, wall thickness within the section’s design envelope, finish colour and bundle size. A length schedule supplied with the order is cut to as issued, so material arrives ready to fabricate.
Factory and Export Capability
Shipment is arranged from the selected partner manufacturer; the manufacturing entity and export eligibility are confirmed for each order. Factory capability and production capacity are verified against the selected manufacturer’s current documents before order confirmation. Profiles are filmed, moisture-wrapped, foam-interleaved and timber-crated, and containers are loaded under our own supervision on FOB, CIF or DDP terms.
Production and Finishing
Extrusion in the confirmed alloy and temper, then anodising, powder coating, PVDF, electrophoresis or wood-grain transfer to the approved colour sample.
65MQ160 Full-Series Curtain Wall
Applications
Cost-driven exposed-frame facades
Delivers the expressed-grid appearance where the budget will not carry a thermal-break system.
Where this profile is specified
The configuration of Where this profile is specified is selected against the operating conditions, installation interfaces and destination-market requirements. Include the intended use and site constraints in the RFQ.
Car park and service screens
Unconditioned spaces where a thermal break has nothing to do, at a lower cost per square metre.
Industrial and warehouse elevations
Full curtain-wall geometry and structural performance without paying for thermal separation.
Podium and non-conditioned infill
Matches the grid of a thermal-broken tower system on areas that do not need it.
Mild-climate commercial buildings
Where no facade U-value target applies, the plain section is the correct specification.
Circulation cores and stair towers
Glazed but unheated spaces, structurally identical requirements.
Quality Control & Inspection
Inspection for C.MQ Series Exposed-Frame Curtain Wall can cover the approved specification, appearance, dimensions and agreed performance checks. Factory or third-party inspection criteria must be confirmed before the order.
Packing & Delivery
Enquiry and Drawing
Send the section drawing, a sample, or the opening schedule and performance target. Our engineers confirm which series fits and say so plainly if a different one fits better.
Tooling and Sample
Where a bespoke section is needed the die is designed with simulation analysis, cut and nitrided in house, and a sample length is produced for approval.
Export Packing and Shipping
Protective film, moisture barrier, foam interleaving and timber crating, on FOB / CIF / DDP terms with container loading supervised in house.
Other products in this range, and where they have been used
BIPV Aluminium Frame for Curtain-Wall Modules
BIPV aluminium frame for photovoltaic curtain-wall modules.
65GRMQ120 Exposed-Frame Curtain Wall
65GRMQ120 exposed frame curtain wall 120 mm mullion profile for glazed commercial facades.
Related Products
Project Sourcing & Export Delivery
Requirement Review
Confirm application, drawings, specifications, quantity, destination and delivery target.
Technical Alignment
Check materials, dimensions, performance, finish and destination-market standards.
Quality Inspection
Arrange samples, production checkpoints, factory or third-party inspection as agreed.
Export Delivery
Align packing, labels, documents, container loading and international logistics.
Request a Quote
Specification review, supplier verification, quality control, export packing and delivery coordination for international projects and professional buyers.
