Aluminum Tile Trim & Transition Profile Set
Products are supplied through qualified partner manufacturers in China. Availability and technical support are confirmed for each order. Delivery destinations and terms are confirmed against documented order requirements. Project-specific manufacturer authorization and applicable quality and compliance documents are provided with shipment where applicable. Get quote.
Product Overview & Technical Data
Product Overview
Full range of aluminum tile trims, transitions, skirtings & corner beads for interior finishing — anodized silver, gold, rose-gold or PVD colors.
- ✓6063-T5 aluminum, 1.0–1.5 mm wall thickness
- ✓Anodized 15 μm — scratch and corrosion resistant
- ✓2.5 m / 3.0 m stock length; cut-to-size on request
- ✓L-shape, U-shape, T-shape, arc, quadrant profiles
- ✓Interior + wet-area (bathroom) compatible
Send us your project drawings, target quantity or spec — our export team replies within one business day.
aluminium tile trim profile and transitions manufactured for floor edging, tile protection, and seamless transitions between different flooring materials.
| Item | Detail |
|---|---|
| Company | Chizhou Luyu International Trade Co., Ltd. |
| Business licence no. | 91341721MAKE0F4P7K |
| Registered capital | RMB 38 million |
| Registered address | Bldg 1 No.21, Zhenrong Phase II, Dadukou, Dongzhi County, Chizhou, Anhui, China |
| Scope of business | sale of metal materials and non-ferrous alloys; building and decorative materials; hardware wholesale; supply-chain management; import and export of goods |
| Production | at our designated extruding plant – extrusion presses, thermal-break strip line, wood-grain transfer line, vertical powder-coating line, anodising and electrophoresis |
| Quality control | three laboratories at the plant – chemical analysis, physical & mechanical, spectroscopy |
| Export | own import/export licence; container loading supervised at the plant. FOB / CIF / DDP |
Industry references: the material, finish and test standards cited on this page are maintained by Aluminum Extruders Council and Aluminum Anodizers Council.
Applicable manufacturer-held quality, conformity and finish documents are confirmed for the selected model; independent third-party inspection available on request.
UV-stable and corrosion-resistant materials selected for Gulf desert projects and coastal salt-air environments.
- Aluminum: 6063 alloy, 0.6–5.0 mm wall, indicative MOQ 1 ton per profile, subject to specification and manufacturer confirmation
- Pipes: PVC-U / PE100 / PPR systems, DN20–DN2200
- Finishes: mill, anodized, powder coated, wood grain
- Mixed-container consolidation supported
Destination-market references are used only where supported by documented order records. Available Incoterms and ports are confirmed for each order.
1. What is your minimum order quantity?
Supply & Delivery Notes
Contract & Export Entity
Luyu International coordinates the contract, payment, export documents and project delivery.
Manufacturing Arrangement
Approved manufacturers organize production against confirmed drawings, specifications and orders.
Quality & Documents
Manufacturer certificates, test reports, batch inspection and third-party inspection can be arranged.
International Delivery
FOB, CIF and DDP support covers packing, loading, customs declaration and international logistics.
Certificates, test reports and delivery documents are subject to the current project, product model and documents available from the manufacturer.
Technical Data & Specification Review
Published parameters are reference configurations for this series. Final values are subject to approved drawings, manufacturer technical documents, samples and project inspection records.
| Stock Length | 2.5 m / 3.0 m |
| Wall Thickness | 1.0 mm / 1.2 mm / 1.5 mm |
| Alloy | 6063-T5 |
| Finish | Anodized silver / gold / rose-gold / PVD |
| Shapes | L, U, T, Arc, Quadrant, Corner Bead |
| Standard Sizes | 8-12 mm tile heights |
| Package | PVC film wrap + carton, 20 pcs/ctn |
| MOQ | 500 kg |
Further Reports in the Same Series
Full scanned copies of any of these are sent on request.
| Report no. | Sample as tested | Tested to |
|---|---|---|
| 201840083 | Aluminium building profile – mill finish (square tube) · GK-FG041 | GB/T 5237.1-2008 |
| 201840082 | Aluminium building profile – anodised (curtain-wall mullion) · GK-65MQ120Y01 | GB/T 5237.2-2008 |
| JX201801422W | Fluorocarbon powder-sprayed profile | — |
Applications
Application 01
The configuration of Aluminum Tile Trim & Transition Profile Set is selected against the operating conditions, installation interfaces and destination-market requirements. Include the intended use and site constraints in the RFQ.
Quality Control & Inspection
Certificate registration numbers, report numbers, the standard each sample was tested to and the values actually measured – verifiable with the issuing bodies, and directly comparable with your own specification.
Third-Party Inspection Reports
Abrasion here is a falling-sand wear coefficient and is not comparable with the anodising report’s g/μm figure
| Test item | Standard requires | Measured |
|---|---|---|
| Coating minimum local thickness | ≥ 40 μm | 71 μm |
| Indentation hardness | ≥ 80 | 125.0 |
| Adhesion (dry / wet / boiling water) | grade 0 | grade 0 |
| Abrasion (falling-sand coefficient) | ≥ 0.8 L/μm | 1.3 L/μm |
| Solvent resistance | grade 3 or 4 | grade 4 |
| Tensile strength Rm | ≥ 160 N/mm² | 215 N/mm² |
| Elongation A50mm | ≥ 8 % | 11.0 % |
View full testing, certification and factory-capability information
Composite film = anodic layer plus paint layer, each measured separately
| Composite film local thickness | ≥ 16 μm | 19 μm |
| Anodic film local thickness | ≥ 9 μm | 11 μm |
| Paint film local thickness | ≥ 7 μm | 8 μm |
| Alkali resistance | ≥ grade 9.5 | grade 9.5 |
| Salt-spray corrosion 24 h | ≥ grade 9.5 | grade 9.8 |
| Abrasion resistance | ≥ 3000 g | > 3000 g |
| Tensile strength Rm | ≥ 160 N/mm² | 240 N/mm² |
Management-System Certification
Certificate holder: the designated extruding plant for this product (not this company).
Certified by independent third-party inspection body accredited to ISO/IEC 17065 and IAF MLA requirements
| Standard | Registration no. | Scope |
|---|---|---|
| GB/T 19001-2016 / ISO 9001:2015 | 02119Q10341R0M | Design, production and technical service of aluminium alloy profiles |
| GB/T 24001-2016 / ISO 14001:2015 | 02119E10214R0M | Design, production, technical service and related management activities for aluminium alloy profiles |
| GB/T 28001-2011 / OHSAS 18001:2007 | 02119S10187R0M | Design, production, technical service and related management activities for aluminium alloy profiles |
In-House Test Capability
Three in-house laboratories – chemical analysis, physical/mechanical and spectrometry: direct-reading spectrometer, universal testing machine (JWL-50KN), eddy-current thickness gauge (ED300), gloss meter (HG60), colour-difference meter (NH310), cupping tester, cross-hatch cutter, Rockwell (PHR-200) and Webster (W-20) hardness testers, conductivity meter, constant temperature/humidity chamber
The dates are stated as they appear on the certificates rather than as a blanket “ISO certified” claim – the registration numbers can be checked at cnca.gov. Current validity is rechecked with the designated manufacturer before order confirmation.The inspection reports date from 2018; recent re-testing can be arranged on request.
Packing & Delivery
Packing, labels, loading method and delivery documents for Aluminum Tile Trim & Transition Profile Set are aligned with the product, transport mode and destination requirements.
Related Products
Frequently Asked Questions
Are you a manufacturer or a trading company?+
Can I get samples before I place an order?+
Do you accept OEM dies / custom colors?+
What are your payment terms?+
Do you provide installation drawings?+
Which certifications are supplied with the shipment?+
Do you accept OEM branding & custom packaging?+
Other products in this range, and where they have been used
Aluminum Composite Decor Panel
4 mm aluminium composite panel (ACP) for facade and interior cladding.
Wood-Grain Heat-Transfer Aluminium Profile
Wood grain aluminium profile by heat transfer, combining timber appearance with aluminium durability.
JP60 Thermal-Break Casement Window Aluminium Profile
JP60 60 mm thermal-break casement window profile in 6063-T5 with 14.8 mm PA66-GF25 strip, U-value from 2.4 W/(m2K).
The full range sits under Trim & Transition Profiles, and the buildings and sites these products have gone into are listed under Domestic Engineering Projects. If none of them is quite your specification, say what is different in the enquiry – most of what we ship is made to a drawing rather than picked off a shelf.
Project Sourcing & Export Delivery
Requirement Review
Confirm application, drawings, specifications, quantity, destination and delivery target.
Technical Alignment
Check materials, dimensions, performance, finish and destination-market standards.
Quality Inspection
Arrange samples, production checkpoints, factory or third-party inspection as agreed.
Export Delivery
Align packing, labels, documents, container loading and international logistics.
Request a Quote
Specification review, supplier verification, quality control, export packing and delivery coordination for international projects and professional buyers.
