BIPV Aluminium Frame for Curtain-Wall Modules
Products are supplied through qualified partner manufacturers in China. Applicable manufacturer certificates and scope are confirmed for each model and order. Delivery destinations and terms are confirmed against documented order requirements. Project-specific manufacturer authorization and applicable quality and compliance documents are provided with shipment where applicable.
Product Overview & Technical Data
Product Overview
bipv aluminium framing for building-integrated photovoltaic modules installed as curtain-wall elements, supported in component (stick) type across the 50 / 55 / 60 / 65 / 70 / 75 / 80 / 90 / 100 size ladder and in unitised type, with fully exposed, semi-concealed and fully concealed frame styles.
A BIPV module is two things at once – a piece of the building envelope and a piece of electrical plant – and the frame has to satisfy both. As facade it must carry wind load, keep water out, accommodate thermal movement and meet the same deflection limits as any other curtain-wall panel. As electrical equipment it must allow cable routing, junction-box access and module replacement without dismantling the surrounding elevation. That second set of requirements is what distinguishes a BIPV frame from an ordinary glazing frame, and it is why this bipv aluminium framing is engineered per project rather than picked from a catalogue. Every certified bipv aluminium framing layout ensures seamless electrical integration and structural safety.
Both curtain-wall constructions are supported. Component (stick) type is erected member by member on site across the 50 to 100 mm size ladder, and suits refurbishment and irregular geometry. Unitised type uses factory-assembled units with a high standard of prefabrication and a large saving in site time – the right choice on a tall building where facade access is the critical path. Frame style can be fully exposed, semi-concealed (one axis expressed, the other hidden) or fully concealed, depending on whether the module grid should be legible or the elevation should read as a continuous surface. Additional custom-engineered bipv aluminium framing options are available for specialized architectural geometries.
Section depth and profile geometry are set by the module dimensions and the design wind load, so no fixed catalogue section is quoted here. Send the module datasheet – dimensions, weight, frame or frameless, junction box position – together with the wind pressure and the support spacing, and the framing is designed to it. Publishing a section depth without the design loads is a guess, and a curtain wall is not where guesses belong.
Product Specifications & Applications:
* Product Name: BIPV Aluminium Framing Profile System
* Size Ladder: 50 mm to 100 mm depth coverage for stick and unitised curtain walls
* Frame Styles: Fully exposed, semi-concealed, and fully concealed configurations
* Key Advantages: Dual structural and electrical integration, cable routing, junction-box access
* Applications: Building-integrated photovoltaic (BIPV) curtain walls, green energy facades, bipv aluminium framing installations
Contact our architectural engineering team today to request structural calculation sheets, project design guidelines, or custom extrusion schedules for any bipv aluminium framing procurement requirement.
Drawing or Sample In
Send a section drawing, a physical sample, or simply the opening schedule and the performance you need to hit. Our engineers come back with the series that fits – including when that is a different series from the one you asked about.
Die and First Article
If no existing die suits, a new one is designed with metal-flow simulation, machined and vacuum-nitrided on site, and a sample length is extruded for your approval before the run is scheduled.
Supply & Delivery Notes
Contract & Export Entity
Luyu International coordinates the contract, payment, export documents and project delivery.
Manufacturing Arrangement
Approved manufacturers organize production against confirmed drawings, specifications and orders.
Quality & Documents
Manufacturer certificates, test reports, batch inspection and third-party inspection can be arranged.
International Delivery
FOB, CIF and DDP support covers packing, loading, customs declaration and international logistics.
Certificates, test reports and delivery documents are subject to the current project, product model and documents available from the manufacturer.
Technical Data & Specification Review
Published parameters are reference configurations for this series. Final values are subject to approved drawings, manufacturer technical documents, samples and project inspection records.
| Application | framing for building-integrated photovoltaic modules installed as a curtain-wall element |
| Curtain-wall types supported | component (stick) type in the 50 / 55 / 60 / 65 / 70 / 75 / 80 / 90 / 100 size ladder, and unitised type |
| Frame styles | fully exposed, semi-concealed and fully concealed frame |
| Note | section depth and profile geometry are set by the module dimensions and the wind load, so the frame is engineered per project rather than supplied from a fixed catalogue section |
| Temper and grade | 6063-T5 for standard sections · 6005-T5 where load rating governs · 6061-T6 for the heaviest duty |
| Finish routes | Anodised · powder-coated · PVDF fluorocarbon · electrophoretic · wood-grain transfer, all produced on site |
| Bespoke sections | Die cut to your drawing or sample; existing dies modified where the geometry is close |
| Order-specific dimensions | Cut length, wall thickness inside the design envelope, colour to approved sample, bundle quantity |
| Manufacturing and shipping | 50,000 t/year partner manufacturing base, 100,000 t+ group-wide; direct export licence; supervised container loading |
Dimensional and performance figures are taken from the manufacturing partner’s own product catalogue. Mill certificates, spectrometer analysis reports and coating thickness records are issued with each shipment.
What we can change for your project – and what we cannot
Material and Grade
Extrusion is to 6063-T5 for the standard architectural sections, 6005-T5 where a higher mechanical rating is called for in a structural member, and 6061-T6 for the heavily loaded components. Billet is drawn from major domestic producers and every heat is checked on a direct-reading spectrometer before it goes to the press, so the certificate that ships with the order reflects the metal in the box rather than a nominal grade.
Surface Finish
Seven finish routes run in-house: anodising, powder coating on a vertical spray line, fluorocarbon (PVDF) coating, electrophoretic lacquer, wood-grain heat transfer, thermal-break strip crimping and decorative finishes. Pre-treatment is chromium-free chemistry from an approved partner manufacturer, and the electrostatic powder is first-tier – supplied by an approved partner manufacturer – which is what makes a long colour warranty defensible rather than aspirational.
Custom Tooling
A section that does not exist yet is a normal request here. Die design, simulation analysis, die cutting and vacuum nitriding are all done on site, so a drawing or a physical sample can be turned into a production die without going outside the factory. Where the requirement is a variant of something already in the 5,000-item range, modifying the existing die is faster and costs less than cutting new steel – and we will say which route applies before you commit.
Made-to-Order Sizing
Made to order means made to your figures – cut length, wall thickness inside the section’s design envelope, finish colour and bundle quantity. Supplying the cutting list with the order costs nothing and saves both the offcut waste and the saw time at the other end.
Factory and Export Capability
Export is direct: the approved partner manufacturer carries its own licence for aluminium and aluminium products and loads its own containers under supervision, full-container or consolidated. Capacity behind that is 50,000 tonnes a year at the 100-mu partner manufacturing base and more than 100,000 tonnes across the group. Profiles ship with protective film, moisture-barrier wrapping, foam interleaving and timber crates, on FOB, CIF or DDP terms.
Extrude, Then Finish
The confirmed alloy and temper go through the press, then through whichever finish was agreed – anodising, powder, PVDF, electrophoresis or wood-grain transfer – matched to the approved colour panel.
Packed for the Voyage
Protective film, moisture-barrier wrap, foam between profiles and timber crates, loaded into the container under our own supervision, on FOB, CIF or DDP terms.
Other products in this range, and where they have been used
65GRMQ120 Exposed-Frame Curtain Wall
65GRMQ120 exposed frame curtain wall 120 mm mullion profile for glazed commercial facades.
65MQ160 Full-Series Curtain Wall
65MQ160 curtain wall profile 160 mm mullion in hidden, semi-hidden and exposed frame variants.
Semi-Unitised Curtain Wall System
Semi-unitised curtain wall system, 120 series aluminium profile for mid- and high-rise glazed facades.
The full range sits under Curtain Wall Systems, and the buildings and sites these products have gone into are listed under Overseas Facade Projects. If none of them is quite your specification, say what is different in the enquiry – most of what we ship is made to a drawing rather than picked off a shelf.
Send the drawings, the opening schedule or the performance target. Our engineers will confirm the series, the alloy, the finish and the delivered price — and tell you plainly if another series in the range fits your project better.
Applications
Atria, canopies and skylights
Semi-transparent modules used where daylight and generation are both wanted.
Where this profile is specified
The configuration of Where this profile is specified is selected against the operating conditions, installation interfaces and destination-market requirements. Include the intended use and site constraints in the RFQ.
PV curtain-wall facades
Photovoltaic modules acting as the weathertight envelope, not as panels mounted in front of it.
Net-zero and energy-positive buildings
Facade area recruited for generation where roof area alone is insufficient.
Unitised high-rise BIPV
Factory-assembled units cut facade access time on tall buildings.
Stick-system retrofit
Component type suits refurbishment and irregular existing geometry.
Semi-concealed module grids
Expressing one axis and hiding the other keeps the module rhythm deliberate.
Quality Control & Inspection
Inspection for BIPV Aluminium Frame for Curtain-Wall Modules can cover the approved specification, appearance, dimensions and agreed performance checks. Factory or third-party inspection criteria must be confirmed before the order.
Packing & Delivery
Packing, labels, loading method and delivery documents for BIPV Aluminium Frame for Curtain-Wall Modules are aligned with the product, transport mode and destination requirements.
Related Products
Project Sourcing & Export Delivery
Requirement Review
Confirm application, drawings, specifications, quantity, destination and delivery target.
Technical Alignment
Check materials, dimensions, performance, finish and destination-market standards.
Quality Inspection
Arrange samples, production checkpoints, factory or third-party inspection as agreed.
Export Delivery
Align packing, labels, documents, container loading and international logistics.
Request a Quote
Specification review, supplier verification, quality control, export packing and delivery coordination for international projects and professional buyers.
