Commercial and Industrial Energy Storage Systems
Integrated battery cabinets and containerized systems coordinated around load profile, grid conditions, fire-safety design, EMS strategy and destination-market certification.
From requirement to controlled export delivery
Scenario-based sizing
Size power and energy from demand charge, backup, PV self-use or microgrid objectives.
Layered safety review
Check cell traceability, thermal management, protection logic and fire-safety interfaces.
System integration
Coordinate battery, PCS, EMS, meter, transformer and site communication protocol.
Market-specific evidence
Verify test reports, transport documents and model scope for the destination market.
Typical applications
Peak shaving
Reduce contracted demand and peak electricity costs.
PV self-consumption
Store midday solar generation for later use.
Backup power
Support defined critical loads during grid interruption.
Microgrids
Coordinate PV, storage, diesel generation and grid connection.
EV charging
Buffer high-power charging demand where grid capacity is limited.
Remote facilities
Improve energy reliability at industrial or commercial sites.
Specification and RFQ checklist
A reliable quotation starts with the operating conditions, applicable standards, quantity and destination—not only a reference model.
| Energy and power | Usable kWh, rated kW, discharge duration and overload demand |
|---|---|
| Electrical interface | AC voltage/frequency, grid topology, transformer and short-circuit conditions |
| Battery | Cell manufacturer, LFP chemistry, cycle conditions and traceability |
| PCS and EMS | Operating modes, communication protocol, metering and remote monitoring |
| Environment | Indoor/outdoor, temperature, altitude, corrosion and ingress protection |
| Safety | Detection, suppression, isolation, emergency stop and site spacing requirements |
| Compliance | UN38.3, IEC 62619, CE/UL or local requirements verified for the actual model |
Inspection and document control
Inspection items and documents are agreed against the final configuration and target market before production or shipment.
Factory verification
- Bill of materials and cell batch traceability
- Insulation, protection and communication tests
- Charge/discharge and thermal-management test
- Alarm, interlock and emergency-stop verification
Delivery documents
- Test reports applicable to the supplied model
- UN38.3 and transport documentation
- Drawings, manuals and commissioning checklist
- Packing, lifting and installation instructions
Commercial and export execution
Delivery time, inspection, warranty and logistics are confirmed according to the selected product, project urgency and destination conditions.
| Engineering input | Load curve, single-line diagram, operating objective and installation environment |
|---|---|
| Lead time | Project-specific after technical approval and component confirmation |
| Transport | Dangerous-goods compliant packaging and declared shipping route |
| Commissioning | Remote or site support subject to contract and destination conditions |
Send specifications, quantity and destination
We will check technical completeness, available configurations, documentation and shipment options before issuing a formal quotation.
